ISP Strong Fine Impact Crusher
Compressive Strength: ≤150MPa, ≤250MPa
Processing Capacity: 50-230 (t/h)
Application Fields: water conservancy and hydropower, construction, highway, etc.
Applied Material: granite, basalt, andesite, cobble.
Tel.: (86)-021-38226566 E-Mail: [email protected]
Description
Mainly for crushing hard rock, ISP Series Impact Crusher is a new designed and developed machine with high efficiency. It is mainly used in secondary, tertiary and fine crushing. ISp impact crusher also has certain function of shaping the products and making sand. It is widely used to process sand and aggregate in the field of construction for water and electricity, highway, city construction.
Features
- There are two different adjustable crushing cavities of ISP impact crusher, which increases the efficiency.
- The anti-wear alloy hammer and impact plate increase the utilization and reduce the cost.
- There are special symmetric check-doors at both sides of the frame, which are convenient to change the hammer and impact plate.
- The discharge opening is adjustable. The final product size can be controlled. The shape of the product shows like a cube type.
- ISP impact crusher has smart structure ,easy to maintain, energy-saving.
Working Principle
Electrical motor drives the belt wheel to make the swing jaw move following the specific track by eccentric shaft. After the materials enter into the crushing chamber, they are crushed between the two jaw plates by impacting, bending, and striking, and then discharged from the discharge opening.
Technical Specification
|
Specification |
ISP1005 |
ISP1008 |
ISP1010 |
||
|
Compression Strength(<150MPa) |
Medium Crushing |
Max. Feed Size（mm） |
150 |
200 |
200 |
|
Discharge Size（mm） |
40 |
40 |
40 |
||
|
Fine Crushing |
Max. Feed Size（mm） |
80 |
120 |
120 |
|
|
Discharge Size（mm） |
25 |
25 |
25 |
||
|
Compression Strength(>250MPa) |
Medium Crushing |
Max. Feed Size（mm） |
120 |
150 |
150 |
|
Discharge Size（mm） |
40 |
40 |
40 |
||
|
Fine Crushing |
Max. Feed Size（mm） |
60 |
80 |
80 |
|
|
Discharge Size（mm） |
25 |
25 |
25 |
||
|
Capacity（t/h） |
～50 |
～70 |
～100 |
||
|
Power（kw） |
55 |
75 |
90 |
||
|
Dimension（mm） |
2610×1780×2125 |
2610×1910×2125 |
2610×2275×2125 |
||
|
Specification |
ISP1310 |
ISP1313 |
ISP1513 |
ISP1515 |
||
|
Compression Strength
(<150MPa) |
Medium Crushing |
Max. Feed
Size（mm） |
300 |
300 |
400 |
400 |
|
Discharge
Size（mm） |
40 |
40 |
40 |
40 |
||
|
Fine Crushing |
Max. Feed
Size（mm） |
150 |
150 |
200 |
200 |
|
|
Discharge
Size（mm） |
25 |
25 |
25 |
25 |
||
|
Compression Strength
(>250MPa) |
Medium Crushing |
Max. Feed
Size（mm） |
150 |
150 |
200 |
200 |
|
Discharge
Size（mm） |
40 |
40 |
40 |
40 |
||
|
Fine Crushing |
Max. Feed
Size（mm） |
100 |
100 |
140 |
140 |
|
|
Discharge
Size（mm） |
25 |
25 |
25 |
25 |
||
|
Capacity（t/h） |
～150 |
～180 |
～200 |
～230 |
||
|
Power（kw） |
132 |
160 |
185 |
220 |
||
|
Dimension（mm） |
3140×2080×2715 |
3140×2330×2715 |
3235×2400×2795 |
3235×2680×2795 |
||
Remark:
1.The capacity listed in the table is the corresponding parameters when crushing rocks with the bulk density of 1.6t/m³;
2.The throughput capacity may different when the material is different.